saw bandpass filter F1G83 part no. F1G83 rev. date 2007-05-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nf7004-ps01 1/7 4 5 61 2 3 1 2 3 6 5 4 features z us-pcs applications z usable bandwidth of 60 mhz z no impedance matching require for operation at 50 ? z ceramic surface mounted device package ( 3.0 mm 3.0 mm ) z single-ended operation z rohs compliant package dimensions dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1. 0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters unit minimum typical maximum operating temperature range c -30 25 85 storage temperature range c -40 - 90 power handling capability dbm - - - electrostatics sensitive device ( esd ) pin configurations 2 input 5 output 1, 3, 4, 6 case ground i 1g83
saw bandpass filter F1G83 part no. F1G83 rev. date 2007-05-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nf7004-ps01 2/7 specifications notes : 1) all specifications are based on th e matching schematic shown below, measur ed by agilent network analyzer and full 2 port calibration. 2) electrical margin has been built into the design to accoun t for the variations due to temperature drift and manufacturing tolerances 3) all attenuation measurements are measured relative to insertion loss minimum typical maximum unit center frequency ( fc ) - 1880.0 - mhz insertion loss (in fc +/- 30.0 mhz) - 2.6 4.2 db amplitude ripple (in fc +/- 30.0 mhz) - 1.3 2.5 dbp-p vswr (in fc +/- 30.0 mhz) - 1.9 2.5 relative attenuation dc ~ 1500.0 mhz 1500.0 mhz ~ 1750.0 mhz 1930.0 mhz ~ 1990.0 mhz 1990.0 mhz ~ 2300.0 mhz 2300.0 mhz ~ 2500.0 mhz 15.0 18.0 10.0 20.0 18.0 20.0 24.0 21.0 26.0 27.0 - - - - - db temperature range (operational) -30 25 85 input rf power (in fc +/- 30.0 mhz) - 10 - dbm input/output impedance 50 ohms
saw bandpass filter F1G83 part no. F1G83 rev. date 2007-05-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nf7004-ps01 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) marking configuration 1) i 2) 1g83 3) 1) pad number 1 index 2) manufacturer name 3) marking number * ink or laser marking available
saw bandpass filter F1G83 part no. F1G83 rev. date 2007-05-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nf7004-ps01 4/7 typical performance ( at 25 ) ch1 s21 log 10 db/ ref 0 db center 1 880 . 000 000 mhz span 600 . 000 000 mhz cor 29 may 2007 10:04:31 1 2 3 4 5 5: -2 . 0316 db 1 880 . 000 000 mhz ch1 markers 1: -2 . 2544 db 1. 85000 ghz 2: -3 . 0687 db 1. 91000 ghz 3: -13 . 955 db 1. 93000 ghz 4: -56 . 982 db 1. 99000 ghz ch2 s21 log 1 db/ ref 0 db center 1 880 . 000 000 mhz span 150 . 000 000 mhz cor 29 may 2007 10:04:41 1 2 2: - . 66570 db 60. 000 000 mhz ref=1 ch2 markers mean : -1 . 9345 db s. dev : . 30780 db p-p : 1. 4843 db
saw bandpass filter F1G83 part no. F1G83 rev. date 2007-05-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nf7004-ps01 5/7 ch1 s11 swr 1 / ref 1 center1 880 . 000 000 mhz span 600. 000 000 mhz cor 29 may 2007 10:04:57 1 2 3 3: 1. 9000 1 880. 000 000 mhz ch1 markers 1: 1. 4429 1. 85000 ghz 2: 2. 1958 1. 91000 ghz ch1 s22 swr 1 / ref 1 center1 880. 000 000 mhz span 600. 000 000 mhz cor 29 may 2007 10:05:11 1 2 3 3: 1. 8981 1 880. 000 000 mhz ch1 markers 1: 1. 4222 1. 85000 ghz 2: 2. 2484 1. 91000 ghz ch1 s11 1 u fs center1 880. 000 000 mhz span 600. 000 000 mhz cor 29 may 2007 10:05:02 1 2 3 3: 27. 405 8. 6943 736. 04 ph 1 880. 000 000 mhz ch1 markers 1: 42. 539 15. 273 1. 85000 ghz 2: 23. 280 -6 . 5508 1. 91000 ghz ch1 s22 1 u fs center1 880. 000 000 mhz span 600. 000 000 mhz cor 29 may 2007 10:05:18 1 2 3 3: 27. 363 8. 4033 711. 40 ph 1 880. 000 000 mhz ch1 markers 1: 44. 172 15. 604 1. 85000 ghz 2: 22. 867 -7 . 6123 1. 91000 ghz input / output vswr charts input / output smith charts
saw bandpass filter F1G83 part no. F1G83 rev. date 2007-05-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nf7004-ps01 6/7 packing specification 1. reeling quantity : 3000 pcs / 13? reel ( or 1000 pcs / 7? reel ) 2. taping structure : the tape shall be wound aroun d the reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel top cover tape carrier tape end start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F1G83 part no. F1G83 rev. date 2007-05-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nf7004-ps01 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 3.40 0.1 b 3.40 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|
